Introduction
SHC-1 Pd on Alumina catalyst uses alumina as carrier, palladium as active component, and carries special additives. SHC-1 Pd on Alumina catalyst has the characteristics of high activity, good selectivity and stability, high strength, long service life, and wide application range. SHC-1 Pd on Alumina catalyst is widely used to remove olefins in the benzene fraction of reforming oil, the whole fraction of semi-regenerative reforming oil, and the BTX fraction of continuous reforming oil, while the aromatics in the product are basically not lost, and benzene, toluene, xylene and raffinate oil with bromine index meeting the index requirements are produced to meet the increasingly stringent environmental protection requirements.
Product Parameters
|
Main technical indexes of SHC-1 Pd on Alumina catalyst |
|||
|
Other attributes |
|||
|
Place of Origin |
China |
||
|
Classification |
Catalyst |
||
|
Other Names |
Pd on Alumina catalyst | ||
|
Application |
Hydrocracking unit |
||
|
Brand Name |
XUNDA |
||
|
Model Number |
SHC-1 |
||
|
Quality standards |
|||
|
Appearance |
Yellowish brown strip |
||
|
Granularity, mm |
Φ(1.4~1.6) |
||
|
Bulk density, kg/L |
0.70~0.80 |
||
|
Average side crush strength, N |
≥90 |
||
|
Specific surface area, m2/g |
≥170 |
||
|
Pore volume, ml/g |
≥0.45 |
||
|
Content of active component |
Pd |
||
|
Operating conditions and purification indexes |
|||
|
Velocity, h-1 |
2.0~4.0 |
||
|
Hydrogen oil volume ratio, vv |
200~300 |
||
|
Temperature, ℃ |
160~210 |
||
|
Hydrogen pressure, MPa |
1.8~2.2 |
||
|
Types of raw oil |
Semi regenerative reforming to produce complete fractions of oil |
||
|
Product generated |
Bromine value<0.1g, Br/100g oil |
||
|
Supply Ability |
|||
|
Manufactuer |
Yes |
||
|
Certification |
ISO9001:2015 |
||
|
Supply Ability |
9600 Ton/Tons per Year |
||
|
Packaging and delivery |
|||
|
Packaging Details |
Jumbo bag or steel drum package |
||
|
Port |
Shanghai, Ningbo, Shenzhen, Qingdao |
||
|
Selling Units |
Single item |
||
|
MOQ |
1ton |
||
|
Lead Time |
|||
|
Quantity (kilograms) |
>1000 |
||
|
Lead time (days) |
To be negotiated |
||
SHC-1 Pd on Alumina catalyst has the following advantages:
1.High activity, good selectivity,
2.High strength, long service life,
3.Wide application range.

Application
1. Organic synthesis: In organic synthesis, Pd on Alumina catalyst can be used to catalyze hydrogenation reactions, oxidation reactions, aromatization reactions, reduction reactions, etc. These reactions are commonly used in the production of various chemicals, such as spices, pharmaceuticals, coatings, rubber and plastics.
2. Petrochemical industry: Pd on Alumina catalyst are also applied in petrochemical industry and can catalyze various reactions, such as oxidation, reduction, polymerization, dehydration, hydrolysis, etc. In the field of electronics, palladium catalysts also play a role, such as in the preparation of synthetic polymer materials and fine chemicals.
SHC-1 Pd on Alumina catalyst is packaged in a cardboard drum with a plastic bag lining the inside and it contains no impurities. In order to prevent the catalyst from being damaged, rolling is prohibited during transport. During storage, regular inspections should be conducted and take care to avoid dampness. To ensure that the catalyst activity is not affected, it should be stored in dry and well-ventilated warehouse, it is prohibited from being piled up in the air or with other harmful chemical products.
production process
From material to product



Product production process

Hot Tags: Pd on Alumina catalyst, China Pd on Alumina catalyst manufacturers, suppliers, factory, hydrorefining catalyst for reducing fuel gum formation, hydrorefining catalyst importers, hydrorefining catalyst for ultra low sulfur diesel production, hydrorefining catalyst for naphthenic fuels, hydrorefining catalyst for premium gasoline production, hydrorefining catalyst for aromatic fuels







